Skip to main content

What is weighted or loaded sterling?

A customer wrote in today with the following question which I have gotten a lot over the years.  She asks, “Hi, just making sure about the content....you have .925 as a tag yet it says cement loaded. is this solid sterling or plated and what would the weight be of the sterling? thank you”
It’s a great question and there are lots of misconceptions about silver, so I am going to address the question of what does it mean when something is “weighted” or “loaded” and is marked sterling. 
Here’s my response to the customer:
“Thank you for asking.  That's a good question.  This item is Sterling silver (92.5% Silver by content), not plated.  It has the stamp STERLING on the bottom and the maker's mark for Fisher, a well known producer of Sterling silver items.  Here's additional info should you want to know more:
This piece is pretty typical for sterling silver candlesticks and some other types of serving items like bonbon dishes, compotes and so on.  What the makers did was to create these types of items from .925/1000 sterling silver, but they are hollow ware.  The hollow space is filled (aka 'loaded', 'weighted' etc...) with concrete, wax, sand or anything else that would give the item added heft.  There is no way to know the exact weight without cutting the item up.”


Fake Gold Medallion
So, yes, all items marked STERLING are made of metal that is 925 parts out of 1,000 silver.  And no, if they are weighted or loaded, they are not solid STERLING.  The STERLING standard was made law because governments (especially England initially) wanted a way to standardize the use of this precious metal and allow people to distinguish between silver and other alloys.  At one time, these items were required to pass through the hands of a local assay office.  It’s fairly rare in my experience to run into items marked STERLING that are fake, because of the relatively small value of silver (currently about $20/ounce) compared to more precious metals.  Gold on the other hand, is frequently faked.  I myself have purchased fake gold much to my disappointment as shown in the example of a fake medallion stamped 14K that is probably produced in Mexico shown at right.  Yeah, yeah, I should have known better. 

There are occasional examples where an unscrupulous maker has filled sterling silver or sterling silver jewelry without disclosing it. In the bracelet marked 'Mexico' and '925' below left, the maker didn't appropriately note that it was concrete-filled or 'weighted', a fact that was revealed by an astute collector (right). It is very likely that this bracelet was made to deceive tourists in Mexico into believing that a lot more silver had been used to make the bracelet than the reality which was a thin skin of silver.
Photo by Andy Meyer
Photo by Andy Meyer


Electroplating or silver plate, by contrast, is a process by which a thin layer of silver is applied to a base metal like copper or brass using an electric current.  By LAW, these items can NOT be stamped with the word STERLING.  Frequently, they will be stamped with things like: 'EPNS' (electroplated nickel silver), 'quadruple plate' etc...”  Unscrupulous sellers frequently mark these items with labels like “Sterling silver plate”, which strictly speaking is true, but is deceptive at best.  Sellers also will represent silver plate as “silver tone” which makes it very difficult to determine the metal content.  Generally, I recommend that buyers avoid such items if they are looking to make a good purchase of silver.  These items have virtually no value on the antiques market unless they are very old, very interesting, or have very fine craftsmanship.  The serving dish that grandma used that’s marked EPNS on the bottom and was used to serve the green beans at Christmas, sadly, is worth very little on the antiques market.

If you are interested in sterling silver, I might have the item you need.  Check out the shop:

Comments

  1. Nice blog! This information keeps valuable stuff for worth of sterling silver. Before you sell your sterling silver candlesticks for weight, you should pass it by some antique dealers for its artistry and craftsmanship, its age, rarity or historical significance.

    ReplyDelete

Post a Comment

Popular posts from this blog

Robert Bricker Foundry: 1800 Degrees or 2,000 Years

  A small element On a cold January morning, I had the distinct honor to visit the Robert Bricker foundry in Virginia. The foundry is part of a large secure industrial complex tucked away in a corner of a small town. When I arrived, Bricker came down from his sprawling perch to meet me. Though I have met him numerously, it's easy to forget how tall he is. We climb flights of stairs before entering his art complex which he has maintained for over four decades. Suddenly, entering the room and seeing the scale of his operation, Bricker seems both imposing and yet not as tall in the context of the high ceilings and sweeping open wall studios. I am endlessly fascinated to hear the story about how artists found their talents and when. At one moment, Bricker brought down a model airplane-- his first project. He had built this airplane as a boy from balsa wood, even making the detailed rivets by snapping off the heads of pins to line the wings. He demonstrated the spring-loaded machi...

An Afternoon at Trimble's Tavern Antiques with Chris and his 'Witnesses of History'

Chris Trimble Trimble's Tavern Colonial Shoe Buckles, a pewter pap boat and riding spurs To spend a few hours shopping at Trimble's Tavern is an extraordinary privilege. And if you chance to engage Chris Trimble, two things become immediately evident. Firstly, you are speaking with one of the most expert pair of eyes in the mid-Atlantic antiques business and secondly, you have come to a place that has been overtaken by an extreme passion for history. From the imposing and rare large scale furniture pieces to the smallest coin, everything here exudes a past-- and when he's able to avail himself (only because he is in such high demand), Chris Trimble will be your guide. His formal education and a lifetime of scholarly study of colonial American history is instantly accessed as he recalls the stories of how he acquired a piece and why it's so important. You will find his shop just as you enter the small town of White...
How Can I Tell if it's Silver or Silver Plated? In the world of antiques, the line between silver and silver-plated can be deceptively thin. As dealers, we’ve all seen it—the moment someone brings in a cherished piece, convinced it’s solid silver, only for a closer examination to reveal otherwise. It’s an easy mistake to make; after all, silver-plated items were crafted to mimic their solid counterparts, often with impressive skill. But understanding the difference is essential, not just for assessing value but for appreciating the craftsmanship and context of each piece. Allow me to share the most reliable methods of identification, each with its own advantages and pitfalls, to help you discern the genuine article from its plated counterpart. You can, of course, reach out to DC Silver (www.dcsilver.com) for guidance about specific items. 1. Hallmark Examination Method : Look for hallmarks or stamps. Sterling silver often bears marks like "925" or "Sterling," wh...